 |
Technical data
• Image sensor – 1/3″ CMOS image sensor OV10633 WDR • Effective pixels – 1280 (H) X 720 (V) • Image compression method – H.264 / MPEG4 / MJPEG (Triple streaming) • Image frame rate – 720P, SVGA, VGA 25fps • Monitor output – CVBS: 1 Vss, 75Ω, PAL Electrical • Synchronisation – Internal • Signal/noise ratio – > 50 dB • Wide Dinamic Range – 115 dB • Lens type – C/CS whit adapter • IR cut filter – Yes • Gamma correction – 0,45 • Sensitivity Colour / B&W – Colour: 0.5 lux (F1.2) 50 IRE; • White balance – Off/On/Outdoor/Indoor • Electronic shutter – AES 1/25 – 1/10000 s • Back-light compensation (BLC) – 6 zones • Automatic gain control (AGC) – yes • Audio codec – G.711 (U-law, A-law) • Audio feature – Two-way mono audio; full duplex • Alarm – Yes, 3x Alarm In & Alarm Out • Motion detection – Yes, 16x 12MD windows & 3 sensisivity levels • Privacy zones – 8 • Image enhancement – 2 DNR • Storage medium – SD card, up to 32 GB (2 GB SD card included in the delivery) |
Power supply
• Power requirement – DC 12V / AC 24 / PoE • Power consumption – 5.5 W • Power consumption – 5.5 W • Power connector – Terminal block Environment • Environmental operating temperature – 0 – 50°C • Relative humidity – 0 – 80% • Storage temperature – -20 to +60°C Network • Web browser – IE 6.0 above / Firefox, Safari with VLC plug-in • Security – Firewall / forbidden protocol 802.1x • Ethernet – 1 x 10/100 base-T Ethernet connection for LAN • Internet protocol – TCP/IP, UDP, HTTP, HTTPs, SMTP, SNMP, DNS, DHCP, NTP, ARP, ICMP, FTPc, FTPs, DDNS, RTPS (RTP, RTCP), IGMP v3, UpnP, CIFS, NFS, IEC802.1x, ONVIF. • Connections – RJ-45 for Ethernet 10 BaseT/100BaseTX (PoE) Power connector (terminal block type), Terminal block for 3 alarm inputs, 1 output I/O connector • Network port – RJ45 with LEDs • Audio IN/OUT – Spring type terminal block • Video Output – BNC Mechanical • Dimensions (LxWxH) – 122x72x63mm |
